Contents
How do I change a line to a construction line in Fusion 360?
How do I change the line width in Fusion 360?
You can also go to your Preferences and select the line width settings you want by default. Preferences are found under your log-in picture/name in the upper right hand corner.5 juil. 2020
Where is the line tool in Fusion 360?
The line tool is under the “sketch” category or if you use the marking menu you can click sketch and quickly drag your cursor down through the line tool… clicking again to activate it. With the line command active you can draw a line on any sketch plane or surface of a 3D model.27 déc. 2018
How do you join a line in Fusion 360?
Are there construction lines in Fusion 360?
In the browser in the drawing work space, look for the created construction sketch and activate it. The sketch will be displayed in the drawing as construction line.30 mai 2018
What is a fusion 360 construction line?
In Fusion 360, short-dashed line (- – – – -) is used for representing the Construction Line! But, the conceptual meaning of dashed line is to represent hidden edges on engineering drawing according to ISO 128.15 mai 2020
What does fix Unfix do in Fusion 360?
Fix/Unfix Constraint If I select fix/unfix, and click on a line, you’ll notice that it turns green. Notice while the position of the line itself is fixed, the endpoints can still be adjusted.4 oct. 2018
Which of the following company is using Fusion 360?
Companies Currently Using Autodesk Fusion 360Company NameWebsiteTop Level IndustryFacebookfacebook.comMedia & InternetCardone Industriescardone.comManufacturingVista Outdoorvistaoutdoor.comManufacturingPTCptc.comTechnical2 autres lignes
How do you make a new plane in Fusion 360?
How do you cut a 45 degree angle in Fusion 360?
How do you combine sketches in Fusion 360?
There is no separate command to combine two sketches into one. However one option is you can Project one sketch into another using the Sketch->Project/Include->Sketch command.22 nov. 2016
How do you mirror in Fusion 360?
How do you use the midpoint in Fusion 360?
How do you fix a Fusion 360?
1. Perform Clean Uninstall Fusion 360.
2. Restart the system.
3. Check for the recommended latest Graphic card drivers installed.
4. Check for any Anti-virus or Firewall restrictions.
5. Download and Install from Autodesk Account.
6. Launch Fusion 360.
What sketch constraint s would you apply if you want the endpoint of a line to attach to the middle of another line and remain at 90 degrees in Fusion 360?
The midpoint constraint allows us to force the endpoint of a line to the center point of a line or arc. If I select the endpoint of this line and then select the bottom line you’ll see that it snaps to the midpoint and the triangle, or midpoint glyph now appears. Want to learn more about Fusion 360?4 oct. 2018