What does the flatten command do in autocad?

Use the FLATTEN command to change the Z values of all lines, arcs, and polylines to 0. Turn off or freeze any hatch layers with hatch patterns so they are not included in the selection. Type FLATTEN at the command line.

Considering this, what is flattening a drawing? FLATTEN creates a 2D representation of selected objects and projects them onto the current viewing plane. FLATTEN results in 2D objects that retain their original layers, linetypes, colors and object types where possible.

Quick Answer, how do you flatten an object in Autocad?

In this regard, how do I create a flat pattern in Autocad?

1. Click Place Views tab Create panel Base .
2. In the Drawing View dialog box, select a sheet metal component as File.
3. In the Sheet Metal View area, select Flat Pattern view.
4. If appropriate, select or clear the selection of the Recover Punch Center option.
5. Set other options in the Drawing View dialog, and then click OK.

Frequent question, how do you flatten a drawing so all linework is at an elevation of 0?

1. Set up the view of the 3D model.
2. Click Home tab Section panel Flatshot.
3. In the Flatshot dialog box, under Destination, click one of the options.
4. Change the color and linetype settings for Foreground and Obscured lines.
5. Click Create.

How do I flatten an AutoCAD 2020?

Tool Set: Drafting tab > Modify panel > Flatten Objects. Menu: Modify > Flatten Objects. FLATTEN creates a 2D representation of selected objects and projects them onto the current viewing plane. FLATTEN results in 2D objects that retain their original layers, linetypes, colors and object types where possible.

How do you flatten a drawing in Autocad LT?

How do you avoid non coplanar lines in Autocad?

1. Select all of the lines to be modified.
2. Right-click and select Properties.
3. Set Start Z and End Z to 0 (zero) or another consistent value. The default may show “Varies.”

How do you convert 3D to 2D?

1. Click Modify tab Design panel Convert 3D To 2D Polylines Find.
2. Select the polyline(s) to convert. Press Enter.

How do you flatten sheet metal?

1. In the FeatureManager design tree, select the part and click Flatten. (Sheet Metal toolbar).
2. In the cut list, right-click the body and click Flatten. .
3. In either the FeatureManager design tree or the cut list, right-click the Flat-Pattern. feature for the part and click Unsuppress. .

How do you flatten a part in Inventor?

1. Use the “Thicken/ Offset” command to create a new surface (this also works with a thickness of 0).
2. Save part.
3. Open new part and import surface from point 1 by Derived feature.
4. Use “Unwrap” feature.

How do you make a flat pattern in Inventor?

Create a Flat Pattern from a Sheet Metal Model A selected face unfolds the part using the selected face as the base face. With a single body sheet metal part open, on the ribbon click Sheet Metal tab Flat Pattern panel , click Create Flat Pattern. The flat pattern is created, and displays.

Where is flatten in AutoCAD?

1. Turn off or freeze any hatch layers with hatch patterns so they are not included in the selection.
2. Type FLATTEN at the command line.
3. Select all objects and press the Enter key.
4. Type N for No when prompted to remove hidden lines.

How do I move all lines to zero elevation in AutoCAD?

type ALL for Select objects. type P for properties. type E for elevation. 0 enter.

How do I change the elevation of a line in AutoCAD?

1. Double-click the elevation line you want to relocate.
2. On the Properties palette, expand Basic Location.
3. Click Additional Information.
4. Specify the location of the elevation line: If you want to… Then… relocate the elevation line.
5. Click OK.