How to make 3d revolve in autocad?

Considering this, how do you 3D revolve in AutoCAD?

1. Create the above figure.
2. Select Revolve icon from the ribbon panel, as shown below: Or.
3. Select the object to revolve with a small square cursor, as shown below:
4. Press Enter.
5. Specify the X, Y, or Z axis. If X-axis is selected:
6. Press Enter.
7. Specify angle of revolution.
8. Press Enter.

Beside above, how do you do the 3D revolve?

Additionally, what is the function of revolve in AutoCAD? Creates a 3D solid or surface by sweeping an object around an axis. Open profiles create surfaces and closed profiles can create either a solid or a surface. The MOde option controls is a solid of surface is created.

Likewise, how do you make a solid revolve?

1. Click Solid tab Create panel Revolve. Find.
2. Select a closed object to revolve.
3. To set the axis of revolution, specify one of the following: The start and endpoint.
4. Press Enter. To create a 3D solid the angle must be 360 degrees.

How do I use Revsurf in AutoCAD?

Creates a mesh by revolving a profile about an axis. Select a line, arc, circle, or 2D or 3D polyline to sweep in a circular path around a selected axis. The MESHTYPE system variable sets which type of mesh is created.

Does the materials palette allow you to add materials to your objects?

Clicking on the Materials Browser (or typing RMAT) will open the Material Browser Palette (shown below). Now that you have your object (the cube) and a list of materials, you’re ready to go. The easiest way to apply a material to an object is to click on the material you want to use and then drag it over to the object.

How do you sweep in AutoCAD 3D?

1. Create a circle at the endpoint of the object, as shown below:
2. Select the Sweepicon from the ribbon panel, as shown below:
3. Select the object to Sweep.
4. Press Enter.
5. Select the sweep path.
6. Press Enter.
7. The sweep will be created, as shown below:

What are the 3D commands in AutoCAD?

1. POLYLINE (PL) – The POLYLINE command will allow you to create a 2D polyline.
2. EXTRUDE (EXT) – The EXTRUDE command will extrude a 2D object into a 3D object.
3. PRESSPULL (PRESS) – The PRESSPULL command will extrude a 2D object into a 3D object, or extend a 3D surface.

How do you create a union in AutoCAD?

1. Select Union icon form the ribbon panel. Or. Type Union on the command line < press Enter.
2. Select object 1 and object 2, as shown below:
3. Press Enter.

Is solid revolve feature needs and axis of revolution and a?

To Create a Revolved Solid. A revolved feature must contain an axis of revolution. Create an axis of revolution either by sketching a centerline with the revolved section, or by selecting existing linear geometry.

Which command will give you a solid object?

AutoCAD gives you two commands for those times when you need to draw cylindrical objects. One (revsurf) will give you a complex model comprised of a 3-D surface made up of many facets. The other (revolve) will give you a solid object.

How do you revolve in Creo Parametric?

How do you make a revolve in Fusion 360?

1. Design > Solid > Create > Revolve.
2. Design > Surface > Create > Revolve.
3. Design > Form > Create > Revolve.

How do you use revolve Onshape?

Select Faces and sketch regions to revolve. Select an axis about which to revolve. Select a Revolve type: Full – Revolve about the axis 360 degrees.