How to draw revcloud in autocad?

To create a simple revision cloud type REVCLOUD on the command line and press enter. Click at rectangular from the command line options and then click at two points in the drawing to make the rectangle. A revision cloud will be made in the drawing area as shown in the image below.

Quick Answer, how do I create a Revcloud polyline? In addition to drawing new revision clouds, you can also convert existing entities — lines, arcs, circles, 2D polylines, and splines — into revision clouds. 1 Do one of the following to choose Revision Cloud ( ): On the ribbon, choose Annotate > Revision Cloud (in Markup). On the menu, choose Draw > Revision Cloud.

People ask also, what is Revcloud command Autocad? Creates or modifies a revision cloud. You can create a new revision cloud by selecting two corner points or polygonal points, dragging your cursor, or you can convert an object such as a circle, polyline, spline, or an ellipse into a revision cloud.

Beside above, how do you scale Revcloud?

Furthermore, how do I use Revcloud in AutoCAD 2021?

How do you make an octagon in CAD?

1. Click Drafting tab > Draw panel > Rectangle drop-down > Polygon.
2. At the Command prompt, enter the number of sides.
3. Enter e (Edge).
4. Specify the start point for one polygon segment.
5. Specify the endpoint of the polygon segment.

How do I use Revcloud in AutoCAD 2018?

1. Click Home tab Draw panel Revision Cloud drop-down. Find.
2. In the drawing area, right-click and choose Object.
3. Select a circle, ellipse, polyline, or spline that you want to convert to a revision cloud.
4. Press Enter to keep the current direction of the arcs.
5. Press Enter.

How do you add a revision triangle in AutoCAD?

What are the two options for creating splines in AutoCAD?

A 1-degree spline results in a line; there is no bend. A 2-degree spline results in a parabola; there can be only one bend. A 3-degree spline results in a cubic Bezier curve; there can be two bends.

How do you draw clouds?

How do you add a bubble in AutoCAD?

1. Click Panel tab Insert Component Footprints panel Balloon. Find.
2. Select the component for the balloon.
3. Select the balloon location.
4. Press Enter.
5. Select another component or press Enter to exit the command.

What is a revision cloud?

A revision cloud is a polyline of sequential arcs to form a cloud-shaped object. If you review or redline drawings, you can increase your productivity by using the revision cloud feature to highlight your markups.

How do I change the arc length in AutoCAD?

In the drawing area, right-click and choose the Arc length option. Enter a new approximate chord length for the revision cloud arcs.

How do I edit a revision cloud?

1. Click Modify | Revision Clouds tab Mode panel (Edit Sketch). Revit enters sketch mode.
2. Select segments of the revision cloud, and drag the endpoints to adjust its boundaries.
3. Click Modify Revision Clouds > Edit Sketch tab Mode panel (Finish Edit Mode).

How do I change the arc length of a revision cloud?

1. Click Home tab Draw panel Revision Cloud drop-down.
2. In the drawing area, right-click and choose the Arc length option.
3. Enter a new approximate chord length for the revision cloud arcs.