How to design belt conveyor using autocad?

1. Click Content tab Tools panel Chains/Belts drop-down Chain/Belt Links.
2. In the Draw/Chain Belt dialog box, select Belt.
3. Select the Library button.
4. Choose the type and size of the belt.
5. Determine the number of links that are to be inserted into the drawing.
6. Choose OK.

Also know, how do you make a tube in AutoCAD?

1. Add pipe, as explained in Creating a Piping System.
2. In the drawing, specify a starting point for the pipe run.
3. Continue specifying points to lay out the geometry of the pipe run.
4. To start a new run, enter n (New run) on the command line, and specify the settings on the Properties palette.

Quick Answer, how do you make a groove in AutoCAD?

1. In the Shaft Generator dialog box, select the Groove option.
2. Specify the position where the groove is to be inserted in an existing shaft section.
3. Specify the length of the groove (use a negative value if the groove is to be placed to the left side of the starting point).

Furthermore, how do you make a 3d spur gear in AutoCAD?

Moreover, how do you create a roller in Autocad?

What is AutoCAD P&ID?

P&ID stands for Process and Instrumentation Diagram to show the piping and other related items for process flow. Autocad P&ID represents a detailed graphical representation of the complex process system, including the piping, valves, instrumentation, equipment, and other process components in the system.

How do I draw a 3d curve in AutoCAD?

1. In an active 3D sketch, add sketch points or work points on a face and add dimensions to fix their position.
2. Click 3D Sketch tab Draw panel Curve on Face.
3. In the graphics area, on a part face, draw the curve using existing points, or click to set the first point of the spline.

How do I draw a 3d line in AutoCAD?

How do you make a groove in Autodesk Inventor?

On the Design tab, select Cylinder in the tree control. In the Section features drop-down menu, Add Groove – A, or Add Groove – B . Use the drop-down menu to specify how the groove position is measured within the shaft section. Enables groove dimensions editing.

How do you draw gears in AutoCAD?

How do you make a helical gear in AutoCAD?

1. Start AutoCAD.
2. Make a circle of 35mm radius at center.
3. Make another circle of 50mm concentric to previous one.
4. Make two arcs like this one for cutting teeth.
5. Trim down the circles.
6. Right click on the screen and select multiple.
7. Select all arcs.

How do you design a gear?

Can I draw P&ID in AutoCAD?

AutoCAD P ID software allows you to create, modify, and manage schematic piping and instrumentation diagrams. AutoCAD Plant 3D adds 3D models, including piping, equipment, support structures, generation of isometric, and orthographic drawings. AutoCAD Plant 3D includes the features of AutoCAD P ID.

What is MEP in AutoCAD?

AutoCAD MEP software for designers and drafters. Support mechanical, electrical, and plumbing (MEP) systems throughout the building lifecycle with reliable DWG files. AutoCAD MEP adds features to help you draft, design and document MEP building systems in an AutoCAD environment.

Which software is used for P&ID?

1. EdrawMax. EdrawMax is a very handy graphic tool for all.
2. Lucidchart. Lucidchart is a popular visual tool to create a wide range of graphs and charts.
3. SmartDraw.
4. Visual Paradigm.
5. PROCAD P&ID.