How do you loft a solid in AutoCAD?

1. Create the three circles, as shown above.
2. Move the circles separately in the direction of Z-axis using the MOVE command, as shown below: Another view is:
3. Select the LOFT icon from the ribbon panel, as shown below:
4. Select the cross-section (circles) to apply loft, as shown below:
5. Press Enter.

Similarly, how do you loft a solid?

Best answer for this question, how do you use the loft command in Autocad? Start loft command and select the three circles in the lofting order from bottom to the top and press enter. Now select the guides option from the command line and select both splines from the geometry. You will notice a lofted geometry which follows the guide curve as shown in the image below.

People ask also, how do you expand a solid in Autocad?

1. Click Home tab Modify panel Extend. Find.
2. Select the objects to serve as boundary edges. Press Enter when you finish selecting the boundary edges.
3. Select the objects to extend and press Enter a second time when you finish selecting the objects to extend.

Quick Answer, how do you use a loft?

What is Loft command?

Loft is a method to create complicated smooth 3D shapes in CAD and other 3D modeling software. Planar cross-sections of the desired shape are defined at chosen locations. Algorithms find a smooth 3D shape that fit these cross-sections.

What is loft SolidWorks?

The loft feature is an important tool for (surface) modeling in SolidWorks. The loft feature creates a shape by making transitions between multiple profiles and guide curves. This tool is very valuable for modeling complex surfaces. You can do some really cool stuff when you use this feature properly.

How do you revolve in AutoCAD?

1. Type REV or revolve on the command line or command prompt and press Enter.
2. Type M or mode on the command line < press Enter.
3. Type Surface or S on the command line < press Enter. Select the object to revolve with a small square cursor, as shown below:

How do you loft a sketch?

What is wedge command?

The WEDGE command is used to create 3D solid wedges. Command Access: Ribbon : 3D > Modeling > Box Wedge. Menu : Draw> Modeling> Wedge.

How do you loft circles?

How do you extend an object in Autocad?

To do this in Autocad, click on little pop up menu as shown by green arrow then click on ‘Extend’ command in green box. Select the boundry object, then select the object to be extended in Autocad.

How do you edit solids in Autocad?

1. EXTRUDE (Command)
2. OFFSETEDGE (Command)
3. PRESSPULL (Command)
4. SLICE (Command)
5. SOLIDEDIT (Command)

How do you extend a 3D object in Autocad?

1. Click Home tab Modify panel Extend .
2. At the prompt, enter o (mOde) and at the next prompt, enter s (Standard).
3. Select the boundary edge for extending (1).
4. Enter e (Edge) and at the next prompt, enter e (Extend).
5. Enter p (Project).
6. Enter u (UCS).
7. Select the object to extend (2).

How do I loft in Autodesk?

Go to ‘Create’ > ‘Loft’ to start using the Loft tool. Once it is selected click on both circles. When you do, Autodesk Inventor will automatically create the Loft. When you have created the Loft, turn off both planes to end up with just the cone.