“blue squares” are GRIPS (>>>details<<<) and they are always feeling like magnetic points independent of your OSNAP-setting). If you don't want them deselect the object (as the grips are only apprearing on objects you selected). This was what I needed! Thanks!
Contents
What is the blue snap in AutoCAD?
Or you’re drawing polylines or lines, and they’re snapping to the blue squares. You may be having this issue while: Placing blocks, such as plants, irrigation equipment, site amenities, etc. Drawing a line or polyline.
What are the small blue boxes located on selected objects called AutoCAD?
The “Grip” is the blue boxes that show up after selecting an object. They typically show up at the endpoints, midpoints, quadrants, and centers. As with most things, AutoCAD has a command to adjust each of these.
How do I turn off snapping in AutoCAD?
- 1 On the status bar, right-click the Object Snap button and click Settings.
- 2 In the Drafting Settings dialog box, Object Snap tab, click Clear All and then select:
- 3 Click OK.
What is object snap in AutoCAD?
The Object Snap is used to specify a precise location on the objects. It displays the points on the objects, such as midpoints, center point, quadrant point, insertion point, endpoint, etc., which make the drafting and drawing process effective. For example, Center point.
What is Polar Snap?
PolarSnap restricts cursor movement to specified increments along a polar angle. When you create or modify objects, you can use polar tracking to display temporary alignment paths defined by the polar angles you specify. In 3D views, polar tracking additionally provides an alignment path in the up and down directions.
What is grid snap in AutoCAD?
Grid Snap restricts the movement of the crosshairs to intervals that you define. When Snap is turned on, the cursor seems to adhere, or “snap,” to an invisible rectangular grid when you create or modify objects. Grid and Snap are independent settings but are often turned on at the same time.
How do I turn off the selection dialog box in AutoCAD?
- At the command line, enter SELECTIONCYCLING (System Variable).
- Enter 2 to turn on the selection cycling display window. Enter 0 to turn it off.
What is pick box?
Pick box. When AutoCAD prompts you to select objects, such as when you are erasing objects, the cursor (crosshairs) turns into a square. This square is called a Pick box. The size of the Pick box can be changed. Some AutoCAD users prefer large boxes, some like small boxes.
How do I turn off lasso selection in AutoCAD?
This can be done by going to the OPTIONS menu in AutoCAD, Selection Tab, and untick “Allow press and drag for Lasso”: You can also turn this off in the command line, setting the PICKAUTO system variable to 3.
What is the difference between SNAP and osnap in AutoCAD?
What difference between these two commands? snap is an incriment tool, it alows you to move work in specific increments, the increments can be chaged at any time. osnap is object snap, snaps to a specific part of an object.
How do I turn snapping off?
How do I turn off grid snap?
- Click the shape or object in the worksheet.
- Under Drawing Tools on the Format tab, in the Arrange group, click Align.
- Depending on which options are selected click Snap to Grid or Snap to Shape to disable these options.
What is object snap mode?
An object snap mode specifies a snap point at an exact location on an object. OSNAP specifies running object snap modes, which remain active until you turn them off.
What is snap mode?
Snap mode is indicated by a blue box cursor that snaps to locations allowed by the snap mode. Snapping jumps the mouse cursor directly to a desired location, like a point or the end of a line, when the mouse cursor moves near that location.
What is the importance of object snap?
The Object Snaps (Osnaps for short) are drawing aids which are used in conjunction with other commands to help you draw accurately. Osnaps allow you to snap onto a specific object location when you are picking a point. For example, using Osnaps you can accurately pick the end point of a line or the center of a circle.