- Enter LINETYPE to open Linetype Manager.
- Click Show Details.
- Deselect Use Paper Space Units for Scaling.
- Click OK.
- Double-click into the viewport to activate it.
- Enter REGEN.
Likewise, how do I change the linetype scale in AutoCAD paper space? Type PSLTSCALE into the command line and adjust the setting to 1. Regenerate the drawing again and your linetype scales should adjust to be viewable in paper space.
Beside above, why are my dashed lines not showing up in paper space AutoCAD? In most cases, your issue will be related to linetype scale (LTSCALE) as it relates to Paper Space linetype scale (PSLTSCALE). However, you may have your measurement units mistakenly set to Metric when your drawing is meant to be in Imperial units (or vice versa), which can also affect the appearance of dashed lines.
You asked, how do you make a linetype scale the same in viewport? Type PSLTSCALE in the Command line, and type 1 when prompted to Enter a value. The linetype scale of this Viewport (in Paper Space) will now match the linetype scale you’ve already set in the original drawing (in Model Space).
Similarly, how do I show dashed lines in Paperspace? Double-click inside it and zoom in to your example. Then double-click outside the viewport to return to paperspace. Click on the viewport to highlight it, and change its scale to 1/4″ = 1′-0″. You should see the dashed line in the sample, similar to how it shows in modelspace.
Contents
How do you scale a paper space in AutoCAD?
Type PROP and press Enter. Select the viewport scale by doing either of the following procedures. Select an existing scale from the Standard scale option, In the Custom scale option, type the desired ratio between paper space units and model space units.
How do I fix linetype scale in AutoCAD?
How do you fix linetypes in AutoCAD?
- Use RECOVER to open the drawing.
- Remove the usage of the damaged linetype by changing all layers and objects to a different linetype.
- Enter PURGE and select All.
- Enter SAVEAS to DXF format.
- Close and reopen the DXF file.
Why is my Linetype not changing in AutoCAD layout?
If you change the linetype of a layer or an object but the object remains a continuous line, check the Ltscale system variable. It should be set to your drawing scale factor. If this doesn’t work, set the Viewres system variable to a higher value.
How do you make a dashed line visible in AutoCAD layout?
Why are Lineweights not showing in paper space?
In Paper Space layout tabs you are likely using Viewports. The lineweight display can be activated on a layout tab by simply using the lineweight toggle button. However, the lineweight toggle button is not shown by default install of ACAD.
How do I make lines visible in AutoCAD?
How do you scale from model space to paper space?
- Go to Home tab > Modify panel (expanded)> Change Space to start the CHSPACE command.
- At the prompt, select one or more objects to move.
- Press Enter to end selection and the command. AutoCAD moves the selected objects to the other space.
How do I change my Ltscale in a viewport?
Go to Solution. OP set LTSCALE, MSLTSCALE, PSLTSCALE & CELTSCALE all to 1. Then when you draw in modelspace set your CANNOSCALE to match the viewport scale.
What is the dashed line in AutoCAD paper space?
The dotted line is a representation of the margins you have defined in your printer configuration. If you want to set them to 0 value, open the PC3 file and select Modify Standard Paper Sizes. You can set all the margins to 0.