Frequent answer: How to use revolve in autocad 3d?

1. Create the above figure.
2. Select Revolve icon from the ribbon panel, as shown below: Or.
3. Select the object to revolve with a small square cursor, as shown below:
4. Press Enter.
5. Specify the X, Y, or Z axis. If X-axis is selected:
6. Press Enter.
7. Specify angle of revolution.
8. Press Enter.

Also the question is, how do you do the 3D revolve?

Frequent question, what is use of Revolve command in AutoCAD? Specifies how far the selected object revolves about the axis. A positive angle revolves the objects in a counterclockwise direction. A negative angle revolves the objects in a clockwise direction. You can also drag the cursor to specify and preview the angle of revolution. Object.

Also know, how do you use revolve?

People ask also, how do you sweep in AutoCAD 3D?

1. Create a circle at the endpoint of the object, as shown below:
2. Select the Sweepicon from the ribbon panel, as shown below:
3. Select the object to Sweep.
4. Press Enter.
5. Select the sweep path.
6. Press Enter.
7. The sweep will be created, as shown below:

How the revolved surface are created?

To Create a Revolved Surface. A revolved feature must contain an axis of revolution. Create an axis of revolution either by sketching a centerline with the revolved section, or by selecting existing linear geometry.

How do you use the 3D revolve tool in Illustrator?

How do you use revolve Onshape?

Select Faces and sketch regions to revolve. Select an axis about which to revolve. Select a Revolve type: Full – Revolve about the axis 360 degrees.

What is the use of revolve in Illustrator?

Revolve, as the name suggests, revolves the selected shape/path in a specified degree to create 3d objects. There are lots of options available regarding lighting, shading and mapping through which you can set up lights and map your artwork on to your object.

How do you specify the axis using the revolve command?

What are the 3D commands in AutoCAD?

1. POLYLINE (PL) – The POLYLINE command will allow you to create a 2D polyline.
2. EXTRUDE (EXT) – The EXTRUDE command will extrude a 2D object into a 3D object.
3. PRESSPULL (PRESS) – The PRESSPULL command will extrude a 2D object into a 3D object, or extend a 3D surface.

What is Loft command?

The loft command in AutoCAD is used to create 3D solid or surface. The 3D solid or surface is formed within the space between various cross sections. The cross-sections determine the outer shape of the solid or surface. To create a 3D object using LOFT, we are required to specify at least two cross-sections.

What is an example for Revolve?

Revolve is defined as to think about something, or cause to move in a circle. An example of revolve is thinking about work while trying to go to sleep. An example of revolve is spinning a toy top.

What is the difference between rotate and Revolve?

Difference Between Rotation and Revolution The table given below provides the basic differences between rotation and revolution. Rotation of the Earth is its turning on its axis. Revolution is the movement of the Earth around the Sun. The Earth takes 24 hours to complete a rotation with respect to the sun.

How do you sketch a Revolve?

1. Click Model > Revolve and create a sketch to revolve. This method is referred to as action-object.
2. Select an existing sketch and then click Model > Revolve.
3. Select a datum plane or planar surface to use as the sketching plane and then click Model > Revolve.