Faq

Frequent answer: Can’t see dashed line in viewport autocad?

Double-click inside it and zoom in to your example. Then double-click outside the viewport to return to paperspace. Click on the viewport to highlight it, and change its scale to 1/4″ = 1′-0″. You should see the dashed line in the sample, similar to how it shows in modelspace.

Beside above, why are my dashed lines not showing in AutoCAD layout? In most cases, your issue will be related to linetype scale (LTSCALE) as it relates to Paper Space linetype scale (PSLTSCALE). However, you may have your measurement units mistakenly set to Metric when your drawing is meant to be in Imperial units (or vice versa), which can also affect the appearance of dashed lines.

Frequent question, how do you make a dashed line visible in AutoCAD layout?

Quick Answer, how do I show dashed lines in layout?

Moreover, why is my Linetype not showing in paper space? Enter LINETYPE to open Linetype Manager. Click Show Details. Deselect Use Paper Space Units for Scaling. Click OK.Double-click inside it and zoom in to your example. Then double-click outside the viewport to return to paperspace. Click on the viewport to highlight it, and change its scale to 1/4″ = 1′-0″. You should see the dashed line in the sample, similar to how it shows in modelspace.

Contents

Why is my hidden line not showing in layout?

Toggle Hidden Lines for Printing Objects not in Layout Views Click Output tab Plot panel Page Setup Manager. In the Page Setup Manager, select a page setup and click Modify. In the Page Setup dialog box under Plot Options, click Hide Paperspace Objects.

INTERESTING:   How to slice 3d object in autocad?

Why is my Linetype not changing in AutoCAD?

If you change the linetype of a layer or an object but the object remains a continuous line, check the Ltscale system variable. It should be set to your drawing scale factor. If this doesn’t work, set the Viewres system variable to a higher value.

How do I enable linetypes in AutoCAD?

You can change this setting with a simple system variable. Type PLINEGEN in the Command line, and press Enter. When prompted to Enter new value for PLINEGEN, type 1 and press Enter. Linetype Generation will now be set to “on” (“enabled”) for your polylines.

What is the dashed line in AutoCAD paper space?

The dotted line is a representation of the margins you have defined in your printer configuration. If you want to set them to 0 value, open the PC3 file and select Modify Standard Paper Sizes. You can set all the margins to 0.

Why are lines not showing in AutoCAD?

Select the System tab and click Graphics Performance. Leave Hardware Acceleration on, but uncheck the other options, as pictured below. Click OK, and try adjusting the lines again.

How do I show hidden lines in AutoCAD?

A hidden line projection tool is located with the Helper Tools in the Stock Tool Catalog. Alternatively, you can click Home tab Section & Elevation panel Hidden Line Projection. In a 3D view select one or more objects that you want to use to create your hidden line projection, and press Enter.

What is a hidden line?

INTERESTING:   Can multiple people use AutoCAD?

A hidden line, also known as a hidden object line is a medium weight line, made of short dashes about 1/8” long with 1/16”gaps, to show edges, surfaces and corners which cannot be seen. Sometimes they are used to make a drawing easier to understand. Often they are omitted in an isometric view. Section Line.

How do you make a line invisible in AutoCAD?

  1. At the Command prompt, enter AM2DHIDE.
  2. Select the elements representing the foreground . The blue plate with the hole is the foreground. The Hide Situation dialog box appears.
  3. In the background tab select Invisible on Layer AM_9.

How do I change the linetype scale in viewport?

  1. With PSLTSCALE set to 1 (default), set the current linetype to dashed, and then draw a line in a paper space layout.
  2. In the layout, create a viewport with a zoom factor of 1x, make that layout viewport current, and then draw a line using the same dashed linetype.

How do you make a linetype scale the same in viewport?

Type PSLTSCALE in the Command line, and type 1 when prompted to Enter a value. The linetype scale of this Viewport (in Paper Space) will now match the linetype scale you’ve already set in the original drawing (in Model Space).

Back to top button

Adblock Detected

Please disable your ad blocker to be able to view the page content. For an independent site with free content, it's literally a matter of life and death to have ads. Thank you for your understanding! Thanks