Shop drawings (also known as fabrication drawings) are detailed plans that translate design intent. They provide fabricators with the information necessary to manufacture, fabricate, assemble and install all the components of a structure.
Moreover, how do you make a shop drawing? Shop drawings are prepared following a review of the drawings, specifications and contract documents supplied by the registered professional of record – and other project consultants as may be applicable – and the resolution of any inconsistencies or requested changes.
Subsequently, what is the difference between shop drawings and working drawings? Working drawings help to represent components and communicate with end clients. Shop drawings, on the other hand, are used by fabricators to know how the components will be manufactured and installed during the construction process.
Likewise, what are considered shop drawings? Shop drawings are produced by contractors and suppliers under their contract with the owner. The shop drawing is the manufacturer’s or the contractor’s drawn version of information shown in the construction documents. The shop drawing normally shows more detail than the construction documents.
Similarly, what is the purpose of shop drawings? Shop drawings are used to illustrate how a contractor will meet the project’s design intent, facilitate compliance, and provide essential diagrams, schedules, and other data to be used throughout the build. As such, they’re an integral part of the construction process.
Contents
What is the difference between product data and shop drawings?
1: “Shop Drawings are drawings, diagrams, schedules and other data specially prepared for the Work by the Contractor…” 3.12. 2: “Product Data are illustrations, standard schedules, performance charts, instructions, brochures, diagrams and other information furnished by the Contractor…”
Do architects approve shop drawings?
As long as there is conformity between the shop drawings and the contract documents, the architect’s approval indicates that the architect approves of the contractor’s interpretation of the contract requirements. In the event that there is a subsequent dispute, that approval is binding on the architect or owner.
What are the 6 types of construction drawings?
- Plans.
- Interior and exterior elevations.
- Building and wall sections.
- Interior and exterior details.
- Schedules and room finishes.
- Framing and utility plans.
Do shop drawings need to be stamped?
Shop drawings that are derived from seperate design drawings need not be sealed and stamped by a design professional. The design professionals retained by the Owner should not seal and sign the drawings prepared by the contractor.
What is the difference between shop drawings and IFC drawings?
IFC and Show Drawings in Construction Projects Shop drawing is a drawing that is produced by the contractor, subcontractor, manufacturer, fabricator or the supplier whereas IFC (Issued for Construction) is a type of drawing issued to the contractor by the client or his/her representative.
Are shop drawings the same as as builts?
In short, contract drawings depict the proposed construction, shop drawings provide additional details for construction, and as-built drawings are a record of the final construction including changes. That’s it in a nutshell!
Are shop drawings contract documents?
Shop Drawings—All drawings, diagrams, illustrations, schedules, and other data or information that are specifically prepared or assembled by or for Contractor and submitted by Contractor to illustrate some portion of the Work. Shop Drawings, whether approved or not, are not Drawings and are not Contract Documents.
What is the difference between a shop drawing and a submittal?
The shop drawing review and approval process formalizes the method for a contractor to demonstrate how it will accomplish these design obligations. The submittal process also allows the design professional to review the design and make sure they comply with the design intent.
What are mechanical shop drawings?
Mechanical Shop Drawing They represent enhanced specifications for installing and fabricating ducts, custom piping connections, and air-handling units. The mechanical shop drawings represent transportation systems such as lifts and escalators, infrastructural elements, and at times industrial machine components.
How do you read a shop drawing?
- Examine the plate size and fitting. Plate sizes are indicated by a specific numerical dimension and an equal sign.
- Notice the slope. The slope is located near the middle of the drawing on the left hand side.
- Look at the height of the object.
- Figure out alphabetical abbreviations.