Frequent answer: Autocad select only one object?

You can select object using a line or a fence. When prompted to select objects, type [F] for fence and simply draw a dashed line across objects you want to select. All crossed and touched objects will be selected. If you made a mistake and selected an object you don’t need, don’t cancel command and start over.

You asked, why can I only select one thing in AutoCAD? Only one selection set is kept at a time. Multiple objects can still be selected with selection or crossing windows, and by holding the Shift key while clicking items. This issue occurs with all commands that require selecting objects: ERASE, COPY, TRIM, EXTEND, and so on.

Furthermore, how do I turn off multiple selections in AutoCAD?

1. At the command line, enter SELECTIONCYCLING (System Variable).
2. Enter 2 to turn on the selection cycling display window. Enter 0 to turn it off.

Subsequently, how do I select one object in an array in AutoCAD? Press and hold the Ctrl key, and then select the items in the array you want to move. Select the base point and second point.

Also the question is, how do I select just a block in AutoCAD?

1. Open the Properties palette.
2. Click the Quick Select button to open the Quick Select dialog box.
3. For the Object Type, choose Block Reference.
4. For the Property, choose Name.
5. For the Operator, choose = Equals (the default).
6. For the Value, choose the block’s name from the drop-down list.

How would you select a set of objects in a drawing?

1. Select individual objects by clicking them.
2. Drag from left to right to select all objects that are entirely enclosed in the selection rectangle or lasso (window selection).
3. Drag from right to left to select all objects that are crossed by the selection rectangle or lasso (crossing selection).

Why can’t I select lines in AutoCAD?

There might be several causes for this: The desired objects are within a viewport on a layout and the viewport is not active. The layer of the objects are locked. The edit mode of an xref is active.

How do you move multiple objects in AutoCAD?

To move objects, select any objects you wish to move and press [Enter]. Two points need to be clicked, the move from point or base point and the move to point. Specify the base point and the second point will indicate how far the objects are to be moved and in what direction.

How do you select similar objects in AutoCAD 2010?

1. right click on drawing.
2. select Quick Select
3. in the Object type list: select Block Reference.
4. in Propeties list: select Name.
5. in Operator list: select = Equals.
6. in Value list: select the object name that you want to select.

How do you remove objects from a selection set?

After making a selection set, Hold the SHIFT button while you select the objects that are to be removed from the selection set.

How do I turn off lasso selection in AutoCAD?

This can be done by going to the OPTIONS menu in AutoCAD, Selection Tab, and untick “Allow press and drag for Lasso”: You can also turn this off in the command line, setting the PICKAUTO system variable to 3.

What is lasso selection in AutoCAD?

The Lasso selection in AutoCAD allows you to create an irregularly shaped window or crossing selection set. Instead of picking two points for a rectangular window (from left to right) or a crossing selection (from right to left), you just press and drag to use the Lasso.

How do I select part of a drawing in AutoCAD?

1. To crop an AutoCAD drawing, first unlock it by doing the following: Right-click the AutoCAD drawing, point to CAD Drawing Object, and then click Properties.
2. Right-click the AutoCAD drawing and click Crop Tool.
3. Drag the selection handles.
4. When you’re done, click the Pointer tool .

What is the fillet command?

The fillet command is used to create rounded edges between the adjacent lines and faces in 2D and 3D. It is also used to connect two tangent arcs in 2D.

Are crossing selection selects what objects?

A crossing selection, selects all objects that are enclosed by the window or any object the window crosses. To add objects, hold the Shift key while making a window or crossing selection. To remove objects, hold the Ctrl key while making a window or crossing selection.