Faq

Best answer: The donut command in autocad is?

Creates a filled circle or a wide ring. A donut consists of two arc polylines that are joined end-to-end to create a circular shape. The width of the polylines is determined by the specified inside and outside diameters.

You asked, what is Doughnut command? Donut command in Autocad. 1) This command is useful to draw a solid-filled circle or wide circle. Donut command consists of two arc polylines that are joined end-to-end to create a circular shape.

Quick Answer, what is circle command in AutoCAD? The circle command is used to draw a circle by specifying the center point and radius.

Best answer for this question, what is ARC command? The ARC command, followed by three mouse clicks on a drawing, draws an arc of defined width. The first point defines a point on a circle, the second its diameter. Entering the second coordinate reduces the circle to a semi-circle, while the right button alters the direction from first to second point.

Similarly, what is difference between circle and donut command? As nouns the difference between circle and donut is that circle is (lb) a two-dimensional geometric figure, a line, consisting of the set of all those points in a plane that are equally distant from another point while donut is doughnut.

  1. Click Home tab Draw panel Donut. Find.
  2. Specify the inside diameter (1).
  3. Specify the outside diameter (2).
  4. Specify the center of the donut (3).
  5. Specify the center point for another donut, or press Enter to complete the command.

Contents

What is rectangle command in AutoCAD?

The rectangle command is used to create rectangles in our drawing. There are two methods to draw a rectangle. In the first method, we can create rectangles randomly by specifying the points. In the second method, we can create rectangles by specifying the value (length and width).

INTERESTING:   How to switch to 3d modeling in autocad 2020?

What is ellipse command in AutoCAD?

The Ellipse is a general command to create ellipse on the AutoCAD display. We can create the ellipse by specifying the two-point on an axis and the endpoint on another axis. The first axis and the second axis of the Ellipse can be determined either as minor or major axis, depending on the specification.

What is polygon command in AutoCAD?

The polygon command is used to create polygons in AutoCAD. We need to specify the number of sides to create a polygon. The maximum number of lines available to create a polygon is 1024. The shortcut command to create a polygon is ‘pol’.

What is the function of arc in AutoCAD?

It creates any arc, major or minor, clockwise or counterclockwise, beginning with the start point (1), and ending at an endpoint (2). The direction is determined from the start point. Draws the minor arc counterclockwise from the start point (1) to the endpoint (2). If the radius is negative, the major arc is drawn.

What is extend command in AutoCAD?

The extend command is used to extend the selected boundaries or edges. The objects are extended so that the edges of other objects can be converged.

What is fillet command in AutoCAD?

The fillet command is used to create rounded edges between the adjacent lines and faces in 2D and 3D. It is also used to connect two tangent arcs in 2D.

Is donut a circle?

In geometry, a torus (plural tori, colloquially donut or doughnut) is a surface of revolution generated by revolving a circle in three-dimensional space about an axis that is coplanar with the circle.

INTERESTING:   Autocad electrical create title block template?

How many circle are combine for donut?

A donut consists of two arc polylines that are joined end-to-end to create a circular shape. The width of the polylines is determined by the specified inside and outside diameters.

What command is used to control variables in AutoCAD?

At the Command prompt, enter SYSVARMONITOR. Click Edit List in the System Variable Monitor dialog box. The Edit System Variable List dialog box displays. On the left are all the system variables available to monitor.

How do you use a command block in AutoCAD?

  1. Draw the objects that you want in the block.
  2. Choose Home tab> Block panel> Create to start the BLOCK command.
  3. Type a name in the Name text box.
  4. You need to specify a base point.
  5. In the Objects section, click the Select Objects button.
  6. Just below, choose Retain, Convert to Block, or Delete.

Back to top button

Adblock Detected

Please disable your ad blocker to be able to view the page content. For an independent site with free content, it's literally a matter of life and death to have ads. Thank you for your understanding! Thanks