In AutoCAD, open the OPTIONS dialogue box. Choose the DISPLAY tab. Located at the bottom-right of the dialogue box, there is a section called “Fade Control”. Adjust the slide bar labelled “Xref display” to control the intensity of the Xref fade.
Likewise, how do you make an xref print lighter?
- Go to the ‘Layers’ manager while in a viewport.
- Select the desired layers and change the value of the ‘VP Color’ to Color to either 8 (dark gray) or 9 (light gray).
Similarly, how do you change xref lineweight? Type LAYER in the Command line and press Enter. 2. In the Layer Properties Manager, expand the Xref layers. Set the lineweight to Default for each Xref layer.
Furthermore, how do I change the color of an xref in AutoCAD? You can do this by changing the viewport color (or VP lineweight) for your xref layers. Like this the xref stays unchanged in modelspace and wil print in whatever you want in paperspace. Go to paperspace, activate your viewport and change the VP color in your layer settings to color 8.
People ask also, how do you make an XREF visible in AutoCAD? On the command line in AutoCAD, type VISRETAIN and set the value to 1. Turn on and thaw all xref layers, and enable them to be plotted. Detach and re-attach the xref. if this does not work, change the name of the xref and then try to attach it again.When an xref is inserted in the drawing the colours appear faded. It looks like it is in a permanent “in-place edit block” mode but it is not. I actually like this new feature because it allows for visual recognition of line work and a distinction between an xref and objects drawn.
How do you get xref GREY?
You can use the layer manager, set the filter to XREF-layer and assign all layers a light grey color, so all geometry objects within the XRef will be displayed in the light grey … as long as they were drawn with color = bylayer.
What is Visretain in Autocad?
VISRETAIN is a System Variable which will control how information from an external reference is held in the Client file that uses this External Reference. However, there is more to this Variable. You can control what is being Synced from the External Reference file using VISRETAINMODE.
How do I change the xref in Autocad without changing the original?
- Click Insert tab Reference panel Edit Reference.
- From within the current drawing, select the reference that you would like to edit.
- In the Reference Edit dialog box, select the specific reference that you want to edit.
- Click OK.
How do you change a layer in xref?
You can change or override the visibility, color, linetype, and other properties of an xref’s layers and define how you want those changes handled when the xref is reloaded. Use the VISRETAIN and VISRETAINMODE system variables to get the desired behavior for the xref layer properties in the host drawing. VISRETAIN=0.
How do I reset xref layers?
On the command line in AutoCAD, type XREFOVERRIDE and set it to 1. Reload the xref. If a nested xref is involved, try un-nesting it and referencing it directly.
How do I grayscale a layer in AutoCAD?
Open the Layers palette (LAYER). Use CTRL+A to select all the layers. Click one of the color boxes in the VP Color column. When the dialog box opens, select Black (or 250).
How do you halftone xref in AutoCAD?
Open Options window. Go to the Display tab. Set the Xref display in Fade control box to 0. Press OK.
Why are my lines faded in AutoCAD?
Causes: A transparency has been set in the active layer. A transparency override has been set for the object in the Properties Palette. Graphics driver is out of date.
How do you show xref in a viewport?
With the problematic viewport open, type VPLAYER in the Command line and press Enter. You’ll see several options in the Command line. Type T for Thaw and press Enter. The layers should now be visible.
How do you make a layer lighter in AutoCAD?
In the Layer Properties Manager, under the Transparency column, click the transparency setting that you want to change. In the Layer Transparency dialog box, from the drop-down list, choose the percent transparency that you want to use as the default for objects on that layer.