Faq

Auxiliary view autocad?

An auxiliary view is one that is projected onto a plane perpendicular to one of the orthographic views and inclined in the adjacent view. Two points define the inclined plane used for the auxiliary projection. Both points must be located in the same viewport.

Subsequently, how do I show auxiliary view in Autocad?

  1. On the ribbon, click Place Views tab Create panel Auxiliary .
  2. Select an existing view as the parent view.
  3. In the Auxiliary View dialog box, set the scale, display style, and view label or accept the current settings.
  4. (Optional) Click an icon to specify the display style for the view:

You asked, what is an auxiliary view?  An auxiliary view is an orthographic view. taken in such a manner that the lines of sight are not parallel to the principal projection planes (frontal, horizontal, or profile). There are an infinite number of possible auxiliary views of any given object.

Likewise, what are the six types of auxiliary views? Auxiliary views are used to find: 1) true length of an inclined or oblique line; 2) true size and shape (TSS) of an inclined or oblique face 3) edge view of oblique face; 4) point view of inclined or oblique line; 5) true size and shape of features on incline or oblique faces.

Quick Answer, what is an auxiliary view and why would it be important? Additional or auxiliary views are necessary to represent the true size and shape of other plane surfaces. A plane perpendicular to only one of the three principal planes is said to be in an inclined position; a plane not perpendicular to any of the principal planes is said to be in an oblique position.

INTERESTING:   What is a rectangle in autocad?

Contents

How do you use auxiliary view?

  1. Open a drawing.
  2. Click Layout > Auxiliary.
  3. Select an edge, axis, datum plane, or surface to create the auxiliary view from.
  4. Drag the box horizontally or vertically to the desired location.

How do you do partial auxiliary view?

What is front view?

A front view is a projection view obtained by drawing perpendiculars from all points on the edges of the part to the plane of projection. The plane of projection upon which the front view is projected is called the frontal plane.

What is a view projected from a primary view called?

– A primary auxiliary view is a single view projected from one of the six principal views. – A secondary auxiliary view is a single view projected from a primary auxiliary view. – A tertiary auxiliary view is a single view projected from a secondary or another tertiary auxiliary view.

Which is an example of an auxiliary view?

Types OF Auxiliary View: The name of auxiliary views are given according to the inclined lines in the principal plane. For example, if the inclined surface is seen in the frontal plane, then such an auxiliary view will be called Frontal Auxiliary View.

What is auxiliary plane in engineering drawing?

Auxiliary Plane The plane which we draw to get the true shape of the inclined surface ( often parallel to Principal Plane ) is an auxiliary plane. Simply, the plane other than the Principal Plane ( i.e. Horizontal Plane, Vertical Plane or Perpendicular Plane) is called Auxiliary Plane.

INTERESTING:   How to draw an angle in autocad 2002?

What is auxiliary view and get it by transformation?

An auxiliary view can be used to create a projection that shows the true length of a line or true size of a plane. An auxiliary view can be directly produced using CAD if the original object was drawn as a 3D model. Folding lines or reference lines represent the edge views of projection planes.

What is the first step in construction of auxiliary view?

The first step in the drawing of any auxiliary view is to draw the object in normal multi-view projection, as shown in figure 5-23. A minimum of two orthographic views is necessary. The space between these views is generally greater than normal. The reason for this will become apparent.

What is Ortho view?

orthographic projection, common method of representing three-dimensional objects, usually by three two-dimensional drawings in each of which the object is viewed along parallel lines that are perpendicular to the plane of the drawing.

What is Auxiliary top view?

Auxiliary views are orthographic views used to present true-shaped views of a slanted surface. In Figure 4-58 neither the front nor the side view shows a true shape of the slanted surface. A top view would show a foreshortened view. Only a view taken 90° to the surface will show its true shape.

Back to top button

Adblock Detected

Please disable your ad blocker to be able to view the page content. For an independent site with free content, it's literally a matter of life and death to have ads. Thank you for your understanding! Thanks