Show Hidden Lines in the Current Viewport Select the viewport in which you want to show hidden lines. Click View tab Palettes panel Properties palette. On the Properties palette, under Misc, in the Shade Plot field, select As Displayed.
Best answer for this question, how do I fix hidden lines in AutoCAD?
Additionally, how do you show hidden lines in paper space in AutoCAD?
Quick Answer, why are my dashed lines not showing in paper space AutoCAD? In most cases, your issue will be related to linetype scale (LTSCALE) as it relates to Paper Space linetype scale (PSLTSCALE). However, you may have your measurement units mistakenly set to Metric when your drawing is meant to be in Imperial units (or vice versa), which can also affect the appearance of dashed lines.
Also know, why are my viewports not showing? To restore the missing viewport, do the following: In the Layer Properties Manager, make sure the layer that contains the viewport geometry is not turned off or frozen. Go to the layout tab that contains the problem viewport. From the Properties palette, select the Quick Select button on the top right.
Contents
Why are my Linetypes not showing in Paperspace?
Enter LINETYPE to open Linetype Manager. Click Show Details. Deselect Use Paper Space Units for Scaling. Click OK.
Why line type is not showing in AutoCAD?
If a linetype contains text characters and those do not display at the correct size in a drawing, most likely the text style that the linetype uses has a defined height applied to it. Enter the STYLE command. Select the text style. Change the height to 0 (zero).
What is a phantom line?
Lines that are made visible as dots or dashes to reveal the edges of objects currently hidden from view.
A hidden line, also known as a hidden object line is a medium weight line, made of short dashes about 1/8” long with 1/16”gaps, to show edges, surfaces and corners which cannot be seen. Sometimes they are used to make a drawing easier to understand. Often they are omitted in an isometric view. Section Line.
How do you make a dashed line visible in AutoCAD?
Most likely your line type scale is set too low. Select your line you want dashed and open the properties on it. Mostly likely it will be 1.0… increase it to around 30 and see how that looks.
What does Ltscale do in AutoCAD?
The LTSCALE system variable is used to control the global linetype scale factor in the drawing. Changing this scale factor, the appearance of linetypes in the drawing also changes. For example, an LTSCALE setting of 1 means that the dash length specified in the linetype definition is read directly as drawing units.
How do I enable linetypes in AutoCAD?
You can change this setting with a simple system variable. Type PLINEGEN in the Command line, and press Enter. When prompted to Enter new value for PLINEGEN, type 1 and press Enter. Linetype Generation will now be set to “on” (“enabled”) for your polylines.
How do I show dashed lines in Paperspace?
Double-click inside it and zoom in to your example. Then double-click outside the viewport to return to paperspace. Click on the viewport to highlight it, and change its scale to 1/4″ = 1′-0″. You should see the dashed line in the sample, similar to how it shows in modelspace.
Why are Lineweights not showing in paper space?
In Paper Space layout tabs you are likely using Viewports. The lineweight display can be activated on a layout tab by simply using the lineweight toggle button. However, the lineweight toggle button is not shown by default install of ACAD.
How do I fix the viewport in AutoCAD?
- Right-Click. Select the Viewport. Right-click. Select Display Locked >> Yes.
- Use the Properties Command. Select Modify >> Properties to open the Properties window. Select the Viewport. Change the Display Locked property of the viewport to Yes.