- Enter LINETYPE to open Linetype Manager.
- Click Show Details.
- Deselect Use Paper Space Units for Scaling.
- Click OK.
- Double-click into the viewport to activate it.
- Enter REGEN.
Additionally, how do you make a linetype scale the same in viewport? Type PSLTSCALE in the Command line, and type 1 when prompted to Enter a value. The linetype scale of this Viewport (in Paper Space) will now match the linetype scale you’ve already set in the original drawing (in Model Space).
Amazingly, how do you scale a paper space in AutoCAD? Type PROP and press Enter. Select the viewport scale by doing either of the following procedures. Select an existing scale from the Standard scale option, In the Custom scale option, type the desired ratio between paper space units and model space units.
Likewise, how do I fix linetype scale in AutoCAD?
Subsequently, how do I show dashed lines in Paperspace? Double-click inside it and zoom in to your example. Then double-click outside the viewport to return to paperspace. Click on the viewport to highlight it, and change its scale to 1/4″ = 1′-0″. You should see the dashed line in the sample, similar to how it shows in modelspace.
Contents
How do you scale from model space to paper space?
- Go to Home tab > Modify panel (expanded)> Change Space to start the CHSPACE command.
- At the prompt, select one or more objects to move.
- Press Enter to end selection and the command. AutoCAD moves the selected objects to the other space.
How do I change the scale of a viewport in AutoCAD?
- Click the Model tab.
- Click a viewport to make it current.
- Choose View > Zoom > Zoom.
- Type the zoom scale factor relative to paper space by appending the suffix xp to the scale factor, and then press Enter.
How do I change my Ltscale in a viewport?
Go to Solution. OP set LTSCALE, MSLTSCALE, PSLTSCALE & CELTSCALE all to 1. Then when you draw in modelspace set your CANNOSCALE to match the viewport scale.
Why is my viewport scale not accurate?
Make sure your MEASUREMENT System Variable is set to 0 (Imperial) Make sure you are using 1″ (inch) as your unit and not 1′ (foot). (if you were then check your UNITS set to Inches) and also you will have to scale everything up a factor of 12. — Tracy W.
What is the meaning of 1 100 scale?
Ratio scales If the scale of the plan is 1 : 100, this means the real measurements are 100 times longer than they are on the plan. So 1 cm on the plan represents a real length of 100 cm (1 metre)
What does the scale 1/100 convert to?
A scale of 1 to 100 is indicated on a drawing using the code 1:100. This can be interpreted as follows: 1 centimetre (0.01 metre) measured with a ruler on the plan would need to be multiplied by 100 to give the actual size of 1 metre.
Why is my linetype scale not changing in AutoCAD?
If you change the linetype of a layer or an object but the object remains a continuous line, check the Ltscale system variable. It should be set to your drawing scale factor. If this doesn’t work, set the Viewres system variable to a higher value.
How do you change the scale on a line type?
To change the linetype scale, click the Linetype drop-down list in the Properties panel of the Home tab and choose Other to open the Linetype Manager. Click Show Details if the lower portion of the dialog box isn’t displayed. In the Global Scale Factor text box, type the scale factor that you want. Click OK.
What is annotative scaling?
Annotative scaling is the process in which you select a scale for a drawing and all the annotative text, dimensions, blocks and hatches change to reflect the scale. This can also be set independently for each viewport so multiple scales can show on one sheet drawing.
Why are my dashed lines not showing in paper space AutoCAD?
In most cases, your issue will be related to linetype scale (LTSCALE) as it relates to Paper Space linetype scale (PSLTSCALE). However, you may have your measurement units mistakenly set to Metric when your drawing is meant to be in Imperial units (or vice versa), which can also affect the appearance of dashed lines.