- Confirm that TIN surface is selected as Type.
- Select the desired Surface layer and Style.
- Click <
> to close the Create Surface dialog box.
- On the Prospector tab of the Toolspace, expand the Surfaces node.
Correspondingly, how do I convert 3D polyline to surface in Autocad? You can use the SURFPATCH command to convert a closed 3D polyline to a surface patch (3D surface). The command option _Curves and selection of the boundary control curve will create a patch surface associative to this curve.
Beside above, how do I convert polylines to surface? To begin adding polylines to this surface, start by turning on the 2′ contours layer in the drawing. Next in the Prospector, expand the surface collection and the EG surface and finally expand the definition of the surface.
As many you asked, how do you convert polyline to surface in Civil 3D?
- In the command line, type FEATUREELEVSFROMSURF command.
- Select the surface to which the object will be projected.
- Select the desired object(s).
In this regard, how do I convert lines to surface in Autocad?
- Click Modeling tab > Surface panel > Convert to Surface.
- Select the objects you want to convert and press Enter. You can convert 2D solids, meshes, regions, planar 3D faces, and polylines, lines, and arcs with thickness.
- Create surfaces from profiles. Create surfaces from profile shapes composed of lines and curves with EXTRUDE, LOFT, PLANESURF, REVOLVE, SURFNETWORK, and SWEEP.
- Create surfaces from other surfaces.
- Convert objects into procedural surfaces.
- Convert procedural surfaces into NURBS surfaces.
How do you make a flat surface in Civil 3d?
How do you convert polyline to contour?
Create a surface, open the definition tab, add the polylines (that have valid elevations) to the surface as Contour data. Note that contour data alone is not a preferred way to define a surface as breakline, point data and boundaries are absent and likely played a role in creating those polylines you call contours.
How do you make a polyline into a 3d face?
How do you convert a polyline to a 3d polyline?
- Click Modify tab Design panel Convert 3D To 2D Polylines Find.
- Select the polyline(s) to convert. Press Enter.
How do you make a tin surface in Civil 3D?
Click Home tab Create Ground Data panel Surfaces drop-down Create Surface Find. In the Create Surface dialog box, in the Type list, select TIN Surface.
How do I add 3D faces to my surface?
- Run the LINEWORKSHRINKWRAP command and select all 3D Faces from which the surface needs to be created.
- From Home ribbon, Create Ground Data click on Surfaces > Create Surface.
- In Create Surface dialog name the surface, select Style, rendering material and click OK.
How do you join a 3D face in Autocad?
- Use the Convert to Surface command (CONVTOSSURFACE) to convert the 3D faces into surfaces.
- Use the UNION command to join the surfaces together.
- Use the Smooth Object command (MESHSMOOTH) to create a mesh from the resulting surface.
Can you create surfaces in AutoCAD?
Go to the Prospector tab in Toolspace and right click on Surfaces, select Create Surface. Alternatively, you can type CREATESURFACE at the command line. Either method will bring the Create Surface Dialogue Box up as shown below.
How do I convert mesh to surface in AutoCAD?
- Click Convert Mesh tab Convert Mesh Convert to Surface. Find.
- Select a mesh object and press Enter. The object is converted to a procedural surface.
- Click Surface tab Control Vertices panel Convert to NURBS. Find.
- Click the surface object to convert it to a NURBS surface.
How do I use Revsurf in AutoCAD?
Creates a mesh by revolving a profile about an axis. Select a line, arc, circle, or 2D or 3D polyline to sweep in a circular path around a selected axis. The MESHTYPE system variable sets which type of mesh is created.