Contents
How do you use holes and threads in Inventor?
1. On the ribbon, click Annotate tab Feature Notes panel Hole and Thread .
2. In the graphics window, click an edge or a circular edge to specify the hole.
3. Move the cursor and click to place the note.
How do you make a hole in the Inventor 2018?
How do you make a tapped hole?
How do you dimension a hole in Inventor?
1. Right-click the hole feature and select Show Dimensions.
2. Double-click the hole dimension.
3. In the Hole Dimensions dialog box, modify the values. Note: If the hole does not contain the associated feature, values are unavailable. Hole Diameter. Sets the value for the diameter of the hole.
4. Click OK.
How do you make a square shaped Inshape?
create a sketch on the surface or plane where you want your hole to start, dimension the square and then use the extrude icon, make sure the subtract selection is highlighted then set your depth, hit the green check symbol. Hope that helps.3 mai 2016
What is a bottom tapped hole?
Bottoming tapped holes are nothing but holes which has tread (tap) to the very bottom of the hole. This bottoming will ensure maximum usage of holes space for threads. Production of bottoming tapped holes can be done with a bottoming tap tool. These taps have only 1 to 1 ½ chamfered threads.12 jui. 2009
What is a blind hole?
Blind holes and through holes A blind hole is a hole that is reamed, drilled, or milled to a specified depth without breaking through to the other side of the workpiece. A through hole is a hole that is made to go completely through the material of an object.
What is the difference between drilling and tapping?
Drilling and tapping are two different actions. Drilling refers to creating a smooth hole in a material with a drill and motor. Tapping is the action that creates a thread into the side of the hole.
How do you add tolerances in Inventor?
Tolerances can be applied while you add dimensions. All you need to do is click the arrow on the right of the value cell and select Tolerance. This opens the Tolerance dialog box for the dimension. Select the type of tolerance you want to apply.
What is dimensioning and annotation?
Definition of Automatically Placed Dimensions. Automatically placing a dimension in a drawing view is the process of retrieving a dimension that has been applied in the modeling environment and using it to annotate the drawing view in the drawing environment.
How do you annotate a chamfer?
1. On the ribbon, click Annotate tab Feature Notes panel Chamfer .
2. On the drawing, select the chamfered model or sketch edge.
3. Select a reference line or edge from the model or sketch that shares endpoints or intersects with the chamfer.
4. Click to place the chamfer note.
Does a tapped hole have threads?
A tapped hole is similar to a pilot hole, except that it is usually larger, and has threads cut into the inside surface of the hole.
Which tap do you use first?
There are times when a Plug tap can be used to start a thread without using a taper tap first if the Plug tap is started with a guiding center or fixture. In blind hole applications, Plug taps are used after a Taper to get closer to the bottom of the hole.
What do you call the hole a bolt screws into?
A hole for a bolt can be called a “bolt hole” (see e.g. this pdf link and the definition for striking plate), but that’s just using bolt as an adjective for the noun hole.11 jan. 2019
