Ordinate dimensions are used to locate the X or Y coordinate value of a point. Click point 1 to identify the point location, click point 2 to locate the dimension line. Ordinate dimensions are especially useful for elevations or OS grids which use specific coordinates.
Quick Answer, what is an ordinate dimension? Ordinate dimensions are a set of dimensions measured from a zero ordinate in a drawing or sketch. In drawings, they are reference dimensions and you cannot change their values or use the values to drive the model. Ordinate dimensions are measured from the axis you select first.
As many you asked, what is co ordinate dimensioning? Coordinate dimensioning creates a series of “chained” dimensions having a common origin and single dimension line. Baseline dimensioning creates dimensions from a common origin using long or short baselines, and where the dimension labels are on unique but parallel dimension lines.
Similarly, how do I add to ordinate dimensions? To add more dimensions along the same ordinate: Right-click an ordinate dimension, and select Add To Ordinate. Click the edges, or vertices, or arcs you want to dimension using the same ordinate. As you click each item, the dimension is placed in the view, aligned to the zero ordinate.
You asked, what is arc length dimension? The Arc Length Dimension tool measures and dimensions the length of an arc anywhere along its circumference. The dimension can be shown with its witness lines perpendicular to a chord on the arc, or perpendicular to a line tangent to the arc.
Contents
What is an angular dimension?
Angular dimensions measure the angle between two non-parallel lines, the angle subtended by an arc, or the angle formed by three selected points. In addition, you can control the layer on which the dimension is created.
What are ordinate dimensions used for?
Ordinate Dimensioning: Ordinate dimensioning is used when the X and the Y coordinates, from one location, are the only dimensions necessary. Usually the part has a uniform thickness, such as a flat plate with holes drilled into it. The dimensions to each feature, such as a hole, originate from one datum location.
Can ordinate dimensions be basic?
We have a pattern of holes which are located using ordinate dimensions. Their tolerance zones are specified using a position tolerance frame, so the dimensions themselves are basic.
How do I change dimension type in AutoCAD?
- 1) Click on the ‘Annotation drop-down’ arrow in the ‘Home’ tab.
- 2) Click on the ‘Dimension style’ (second icon) from all options.
- 3) Now click on the ‘Modify’ and one another dialogue box will open.
- 4) From this dialogue box, you can edit arrows & symbols, text, lines, units, etc.
What is coordinate tolerancing?
Coordinate tolerancing is a dimensioning system where a part feature is located (or defined) by means of rectangular dimensions with given tolerances. An example of coordinate tolerancing is shown in Figure 1-7.
Why is geometric dimensioning and tolerancing important?
GD&T, a vital part of complex machining, offers a number of major advantages: Saving Money — GD&T enhances design accuracy by allowing for appropriate tolerances that maximize production. For many projects, the process provides extra or bonus tolerances, further increasing cost effectiveness.
How do you read position tolerance?
An example of position tolerance is shown below. The top figure shows the position symbol applied to two holes. The boxed symbols can be read “relative to datums A, B, and C, the position of these hole centers shall lie within a cylindrical tolerance zone of diameter 0.3”.
How do I add to an existing ordinate dimension in Creo?
- Click Annotate > Ordinate Dimension or Annotate > Annotations > Ordinate Reference Dimension.
- Select one of the reference options on the Select Reference menu and select a baseline reference on the drawing.
- Hold down the CTRL key and select another entity to create ordinate dimensions for the selected entities.
How do you align ordinate dimensions in Solidworks?
Right-click an ordinate dimension, select Display Options, then choose from these options: Align Ordinate. Aligns all the dimensions along the ordinate with the 0.0 ordinate.