Contents
How do you use the revolve command in Inventor?
1. Join . Adds the volume created by the revolved feature to another feature or body.
2. Cut .
3. Intersect .
4. New Solid .
How do you use revolve in Inventor 2021?
How do you revolve in Inventor 2020?
How do you use the revolve in Inventor 2018?
How do you use the Revolve tool on shape?
What is revolve in Autodesk?
Autodesk inventor revolve tool use to create a feature or body by revolving one or more sketched profiles about an axis. You can revolve profile through any angle up to 360 degrees. The axis of revolution can by part of the profile or offset from it.26 jui. 2020
What does the revolve tool do?
ℹ️ This tool is available to all users. You can create solids such as sphere, cylinders, and cones by revolving faces or closed sketches with the Revolve tool. Not only that, but you can also create helical objects by adding height to your revolved sketch or face.
How do you revolve in a circle?
Which type of constraint creates relationships between points and objects?
Geometric constraints
How do you project geometry in Inventor 2020?
1. In a 2D sketch, click a face or work plane to set the sketch plane.
2. Click Sketch tab Create panel Project Geometry .
3. In the graphics window, click the geometry that you want to project onto the sketch plane.
4. To finish, right-click and choose Done, press Esc, or click another command.
What is Project geometry inventor?
In Inventor, you can project geometry from existing objects onto the active sketch plane. … The Project geometry command projects model edges, vertices, work features, points, or curves from a visible sketch onto the active sketch plane as reference geometry.14 avr. 2021
How do you make a funnel on shape?
How do you make a cylinder on shape?
How do you make a circle on shape?
How do you use the revolve tool NX?
1. From home tab: feature group -> design feature drop-down -> revolve.
2. Select a section to revolve.
3. In the axis group, we will select specify vector and specify point for revolving.
4. In the limits group, we will select start and end point for revolving.